KTS Central Hot Water Heating

ThermoSystem KTS

The results of consistent ongoing development

With the new KTS Water Heater PRO, ThermoSystem KTS has proved itself as a pioneer of water heaters. KTS can supply water for almost any type of building or application, with increased speed, hygiene, efficiency, innovation and smart technology.

Progress through KTS

With the increasing focus on harmonising the use of regenerative energy sources, maintaining drinking water hygiene and digital control and optimisation functions, there are new and demanding requirements for drinking water heating systems. As a consequence, building technology components need to be better-performing and more flexible than ever. This also applies to their ability to communicate with a central building management system and mobile end devices. All the while, time is increasingly of the essence in planning and execution. This means future systems need to be highly favourable in terms of sizing, assembly and commissioning.

Why choose instantaneous hot water heating?

Ensuring drinking water hygiene while maximising energy efficiency is currently one of the most significant challenges in building technology. It’s essential to choose the right technology for the job. You need it to allow you to avoid risks that may affect drinking water hygiene while also enabling you to use energy as efficiently and sustainably as possible. KEMPER ThermoSystems KTS Water Heaters PRO provide innovative solutions for this very purpose.

As instant water heater system, they achieve a much greater cooling of the heating water than storage systems due to their high performance, even at low primary flow temperatures. This ensures that energy is used much more efficiently and the use of regenerative energy sources is more cost-effective. These solutions also provide significant advantages in terms of drinking water hygiene: Even at least water usage, the water content of the instant heating system is completely exchanged. In contrast, hot water tanks in large properties often store volumes a thousand times larger, increasing the risk of stagnation.

Connected components - KTS Water Heater PRO l KEMPER Group

Connected components that make your installation better.

With PRO, you can make the most of your installation’s potential: The KTS Water Heater PRO detects relevant operating data and sends it to the KEMPER Cloud via PRO WaterManager. Here, we use our expertise to evaluate, interpret and clearly visualise the data for you. As a result, you are in a position to operate your drinking water heating with maximum efficiency, safely and sustainably.

Our digital service models can be matched individually to your requirements. By connecting to other PRO products, you can fully utilise all of the potential of your drinking water installation.

The operating data of the KTS Water Heater PRO is initially transmitted to the PRO WaterManager via modbus-RTU. This then makes the data available to the KEMPER Cloud – classically using a LAN network or via the factory-fitted integrated LTE module using the IoT mobile network. Good to know: Your data is securely stored in Germany.

More about PRO

Simply smart. And with more expertise.

KTS Water Heater PRO: digital product features

Live viewing of operating states via digital product twin
Potential analysis with automatic optimisation suggestions
- to reduce the heating flow temperature
- for elapsed time adjustment of connected heat sources
- for the interaction of hot water provision and connectible MULTI-THERM PRO balancing technology
Analysis of the system parameters for early prediction of required maintenance measures, e.g. in the case of calcification of the heat exchanger (Predictive Maintenance)
Monitoring and automatic documentation of all important parameters, such as temperatures and consumption

Technical data
	M station	L station
PWH capacity*	1.6 l/min - 75 l/min	1.6 l/min - 120 l/min
PWH temperature	30 - 70°C	30 - 70°C
Thermal disinfection	70 - 90°C	70 - 90°C
Max. performance*	262 kW	418 kW
Dimensions H1 x L1 x D1	749 mm x 550 mm x 388 mm	749 mm x 550 mm x 388 mm
*Values are based on storage temperature of 80°C and hot water temperature of 60°C

	Copper solder	Copper solder	Stainless steel	Stainless steel
	M station	L station	M station	L station
single unit	9152010100	9153010100	9252010100	9253010100
2-stage cascade	9152000200	9153000200	9252000200	9253000200
3-stage cascade	9152000300	9153000300	9252000300	9253000300
4-stage cascade	9152000400	9153000400	9252000400	9253000400
5-stage cascade	9152000500	9153000500	9252000500	9253000500